Liquid Flow Switch, DPDT, 125/250VAC

DWYER — Flowmeters — Liquid Flow Switch, DPDT, 125/250VAC

A practical Flowmeters by DWYER intended for repeatable results in shop, facility, and field workflows.

Quick specs

• Body Material: Stainless Steel
• Housing Material: Stainless Steel
• Connection Type: NPT
• Overall Length: 3.6 in
• Manufacturer Part Number: V6EPS-S-D-3-S
• UPC: -

Product information

• Manufacturer Part Number: V6EPS-S-D-3-S
• UPC: -
• Country of Origin: United States

Dimensions

• Overall Height: 4.8 in
• For Pipe Size: 1/2 in, 1/4 in, 2 in, 3/8 in
• Connection Size: 1 in
• Connection Size (In.): 1 FNPT
• Max. Duct Size (In.): 1 in
• Overall Length: 3.6 in
• Overall Width: 3.6 in

Details

• Voltage: 125/250V AC
• Wetted Materials: 301 Stainless Steel, 302 Stainless Steel, 303 Stainless Steel, 304 Stainless Steel, Ceramic
• Compliance: CSA, UL
• Application: Coolant Loops, Other
• Max. Pressure (PSI): 2,000 psi
• Phase: Single
• Min. Ambient Temp. (F): -4 Degrees
• Switch Type: DPDT
• Min. Fluid Temp. (F): -4 Degrees F
• Flow Rate: 3 gpm
• Standards: ATEX, CE Certified, CSA Certified, IECEx, KTL, UL Listed
• Max. Ambient Temp. (F): 167 Degrees F
• Body Material: Stainless Steel
• Hz: 50/60
• For Use With: Liquids or Gases
• Contact Rating: 5A at 125/250V AC
• Material of Construction: Stainless Steel
• Max. Fluid Temp. (F): 220 Degrees F
• Ambient Temperature - Minimum: -4 Degrees F
• Media Temperature - Maximum: 220 Degrees F
• Set Point Configuration: Adjustable
• Media Temperature - Minimum: -4 Degrees F
• Contact Rating (AC): 5 A @ 125/250V
• Switch Enclosure: NEMA 4
• Switch Position: Normally Closed, Normally Open
• Frequency: 50 Hz, 60 Hz
• Wetted Material: 301 Stainless Steel, 302 Stainless Steel, 303 Stainless Steel, 304 Stainless Steel, Brass, Cast Iron, Ceramic, Steel
• Hazardous Location Specification: Class I, Div 1 and 2, Group A, B, C, D, Class II, Div 1 and 2, Group E, F, G
• Flow Switch Type: Paddle
• Ambient Temperature - Maximum: 167 Degrees F
• Contact Rating (DC): 34 A (Inductive) @ 30V (CSA, ATEX and IECEx Models), 5 A Resistive @ 30V (CSA, ATEX and IECEx Models)
• Housing Material: Stainless Steel
• Connection Type: NPT

This Flowmeters is chosen for predictable fit and professional handling.

Recommended for field service tasks and on-site replacement and well-suited for replacement, upgrade, and stock-room use.

Highlights

• Helps keep specifications consistent across replacements and replenishment cycles.
• Designed for professional use where predictable fit and handling are important.
• Works well in standardized part lists and preventative maintenance schedules.
• Clear specification formatting helps reduce ordering mistakes.

Notes: Confirm fit, compatibility, and any site-specific requirements prior to ordering or installation.