Motorized Progressive Cavity Pump, 100psi

MOYNO — Progressive Cavity Pumps — Motorized Progressive Cavity Pump, 100psi

Designed for professional use, this MOYNO Progressive Cavity Pumps helps keep parts and tooling consistent across routine service tasks.

Quick specs

• Max. Viscosity: 20,000 cPs
• Series: 300
• Flow Rate @ Max. RPM and 0 PSI: 4.7 gpm
• Overall Length: 19.7 in
• Manufacturer Part Number: 33259
• UPC: -

Product information

• Manufacturer Part Number: 33259
• UPC: -
• Country of Origin: Multiple

Dimensions

• Solid Diameter (Maximum): 4 mm
• Discharge Connection Size: 3/4 in
• Height (In.): 7 7/8
• Width (In.): 6 1/2
• Length (In.): 19 23/32
• Particle Size: 4.0 mm
• Overall Height: 7.9 in
• Overall Length: 19.7 in
• Overall Width: 6.5 in
• Intake Connection Size: 3/4 in

Details

• Stator Material: Buna-N
• Pump Operation Type: Motorized
• Phase: Single
• Horsepower (Maximum): 1/2 hp
• Intake Connection Type: NPT
• Media Temperature (Minimum): 10 Degrees F
• Nameplate Voltage: 115/230V AC
• Motor Speed (Maximum): 1,750 RPM
• Max. Viscosity: 20,000 cPs
• Series: 300
• Flow Rate @ Max. RPM and 0 PSI: 4.7 gpm
• Flow Rate @ Min. RPM and 90 PSI: 0.21 gpm
• Max. Fluid Temp.: 180 Degrees F
• Application: Abrasive Slurries, Bridge Deck Flooding, Coatings, Dirty Oil, Drum Transfer, Feed Additives, Industrial Waste, Irrigation, Lubricants, Sewage Sampling, Swimming Pool Water
• Housing Material: Cast Iron
• Required HP @ Higher RPM: 1/2 hp
• Min. Fluid Temp.: 10 Degrees F
• Flow Rate @ Min. RPM and 0 PSI: 0.471 gpm
• Flow Rate @ Max. RPM and 90 PSI: 2.45 gpm
• Hz: 60
• Inlet/Outlet (In.): 3/4 NPT
• Seal Material: Carbon, Ceramic
• Voltage: 115/230V AC
• Min. Pressure (PSI): 0 psi
• Max. Pressure (PSI): 100 psi
• Seal Type: Mechanical
• Media Temperature (Maximum): 160 Degrees F
• Discharge Connection Type: NPT
• Motor Mounting Type: Close Coupled
• Frequency: 60 Hz

This Progressive Cavity Pumps is intended for professional buyers focused on durability and uptime.

Recommended for inventory replenishment and standardization and well-suited for replacement, upgrade, and stock-room use.

Highlights

• Works well in standardized part lists and preventative maintenance schedules.
• Clear specification formatting helps reduce ordering mistakes.
• Organized for straightforward purchasing and stocking.
• Suitable for maintenance, repair, and project-based procurement.

Notes: Verify measurement standards, tolerances, and compatibility with existing assemblies before purchase.