Oil and Water-Resistant, Noncorrosive RTV Silicone Gasket Maker, 300 mL, Gray

LOCTITE — Gasket Sealants & Makers — Oil and Water-Resistant, Noncorrosive RTV Silicone Gasket Maker, 300 mL, Gray

A practical Gasket Sealants & Makers by LOCTITE intended for repeatable results in shop, facility, and field workflows.

Quick specs

• Color: Gray
• Features: Non-Corrosive
• Application: Ideal for Sealing All Types of Flanges Including Stamped Sheet Metal Covers Where Water-Glycol Resistance is Required
• Size: 300 mL
• Manufacturer Part Number: 135270
• UPC: 079340185814

Product information

• UPC: 079340185814
• Country of Origin: United States
• Manufacturer Part Number: 135270

Dimensions

• Container Size: 10.14 fl oz
• Maximum Gap Fill Size: 0.2 in
• Size: 300 mL

Details

• Product Form: Paste
• Storage Requirements: 8 Degrees to 21 Degrees C
• Minimum Operating Temperature: -65 Degrees F
• Features: Non-Corrosive
• Application: Ideal for Sealing All Types of Flanges Including Stamped Sheet Metal Covers Where Water-Glycol Resistance is Required
• Color: Gray
• Substrates: Metal, Plastic
• Temp. Range: -75 to 625 Degrees F
• For Use On: The Product is Designed Primarily for Flange Sealing with Excellent Oil Resistance or Rigid Flange Sealing for Example on Transmissions and Cast Metal Housings
• Sealant Base: Silicone
• Sealant Container: Cartridge
• Item: RTV Gasket Maker
• Type: Oil and Water-Resistant, Noncorrosive
• Full Cure: 24 hr
• Begins to Harden: 30 min
• Flash Point: 199.4 Degrees F
• Characteristics: Low Odor, Low Volatility, Noncorrosive, Oil and Water Resistant
• Specific Gravity: 1.5 @ 20 Degrees C
• Standards: California Proposition 65CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, NSF Category P1, OSHA 29 CFR 1910.1200, TSCA
• Container Type: Cartridge
• VOC Content: 49.65 g/L
• Chemical Base: Oxime Silicone
• Tensile Strength: 348 psi
• Full Cure Time: 1 day
• Cure Type: Room Temperature
• Resistance Properties: Oil Resistant
• Sensor Safe: No
• Specific Sealing Application: Flexible Assemblies
• Working Time: 30 min
• Hardness: Shore A75
• Non-Hardening: Yes
• For Material Type: Metal, Plastic
• Sealant Type: Gasket Maker
• Series: SI 5699
• Maximum Operating Temperature: 400 Degrees F

This Gasket Sealants & Makers is designed to support reliable operation in demanding environments.

Recommended for facility operations and routine servicing and well-suited for replacement, upgrade, and stock-room use.

Highlights

• Organized for straightforward purchasing and stocking.
• Suitable for maintenance, repair, and project-based procurement.
• Helps keep specifications consistent across replacements and replenishment cycles.
• Designed for professional use where predictable fit and handling are important.

Notes: Confirm fit, compatibility, and any site-specific requirements prior to ordering or installation.