Progressive Cavity Pump, 50 psi

MOYNO — Progressive Cavity Pumps — Progressive Cavity Pump, 50 psi

Designed for professional use, this MOYNO Progressive Cavity Pumps helps keep parts and tooling consistent across routine service tasks.

Quick specs

• Max. RPM: 1,750 RPM
• Required HP @ Lower RPM: 3/64 hp
• Max. Viscosity: 20,000 cPs
• Overall Length: 17.5 in
• Manufacturer Part Number: 35601
• UPC: -

Product information

• Manufacturer Part Number: 35601
• UPC: -
• Country of Origin: Multiple

Dimensions

• Solid Diameter (Maximum): 9.5 mm
• Particle Size: 9.5 mm
• Height (In.): 8 1/16
• Width (In.): 7 9/16
• Length (In.): 17 1/2
• Overall Width: 7.6 in
• Overall Length: 17.5 in
• Overall Height: 8.1 in
• Intake Connection Size: 1 1/2 in
• Discharge Connection Size: 1 1/2 in

Details

• Media Temperature (Maximum): 160 Degrees F
• Media Temperature (Minimum): 10 Degrees F
• Discharge Connection Type: NPT
• Stator Material: Buna-N
• Max. RPM: 1,750 RPM
• Required HP @ Lower RPM: 3/64 hp
• Max. Viscosity: 20,000 cPs
• Series: 300
• Application: Abrasive Slurries, Bridge Deck Flooding, Coatings, Dirty Oil, Drum Transfer, Feed Additives, Industrial Waste, Irrigation, Lubricants, Sewage Sampling, Swimming Pool Water
• Seal Material: Carbon, Ceramic
• Inlet/Outlet (In.): 1-1/2 NPT, 1-1/4 NPT
• Voltage: Non-Motorized
• Housing Material: Cast Iron
• Min. Fluid Temp.: 10 Degrees F
• Max. Fluid Temp.: 180 Degrees F
• Flow Rate @ Min. RPM and 0 PSI: 2.139 gpm
• Max. Pressure (PSI): 50 psi
• Seal Type: Mechanical
• Flow Rate @ Max. RPM and 0 PSI: 24.0 gpm
• Min. Pressure (PSI): 0 psi
• Required HP @ Higher RPM: 1 1/4 hp
• Intake Connection Type: NPT
• Pump Operation Type: Non-Motorized
• Viscosity (Maximum): 20,000 cps
• Operating Pressure (Maximum): 50 psi
• Motor Speed (Maximum): 1,750 RPM
• Horsepower (Maximum): 1 1/4 hp
• Motor Speed (Minimum): 150 RPM

This Progressive Cavity Pumps is designed to support reliable operation in demanding environments.

Recommended for planned maintenance programs and a practical option for maintenance teams and procurement.

Highlights

• Suitable for maintenance, repair, and project-based procurement.
• Helps keep specifications consistent across replacements and replenishment cycles.
• Designed for professional use where predictable fit and handling are important.
• Works well in standardized part lists and preventative maintenance schedules.

Notes: Review application constraints and installation requirements to ensure the part meets your needs.