Ready to Mix Epoxy Adhesive

J-B WELD — Epoxy & Structural Adhesives — Ready to Mix Epoxy Adhesive, Two 1 fl oz Tubes, Dark Gray, KwikWeld

A practical Epoxy & Structural Adhesives by J-B WELD intended for repeatable results in shop, facility, and field workflows.

Quick specs

• Color: Gray
• Features: Permanent Bond
• Includes: Resin and Hardener
• Size: 1.0 oz
• Manufacturer Part Number: 8276
• UPC: 043425082763

Product information

• Manufacturer Part Number: 8276
• UPC: 043425082763
• Country of Origin: United States

Dimensions

• Size: 1.0 oz
• Container Size: 1 qt

Details

• Interior/Exterior: Interior/Exterior
• Item: Adhesive Remover
• Type: Fast Bond, Quick Cure, Nontoxic
• Application: For Repairing Hobbies and Crafts, Hot and Cold Pipes, Furnaces, Hot Water Heaters, Disposals, Toilets, Appliances, Tools, Yard Equipment and Electrical Plugs
• Color: Gray
• For Use On: Fiberglass, Metal, Plastic
• Container Type: Jug
• Functional Cure: 3 hr
• Full Cure: 4 to 6 hr
• Mixing Ratio: 1:01
• Temp. Range: 0 Degrees to 300 Degrees
• Working Time: 6 min
• Series: KwikWeld
• Epoxy Color: Gray
• Temp. Range (F): 0 Degrees to 300 Degrees
• Epoxy Container: Tube
• Epoxy Max. Temp: 300 Degrees F and Above
• Work Life: 2 min
• Structural Adhesive Type: Epoxy Adhesive
• Shear Strength (PSI): 2,424
• Includes: Resin and Hardener
• Resin Type: Epoxy
• Cure Method: Ambient
• Water Resistance: Not Water-Resistant
• Adhesive Consistency: Paste
• Full Cure Time: 4 to 6 hr
• Marine Grade: No
• Features: Permanent Bond
• Resin Volume: 1 fl oz
• Alternate Product Name: Kwikweld Twin Tube
• Maximum Application Temperature: 120 Degrees F
• Primary Applications: General Purpose
• Maximum Performance Temperature: 250 Degrees F
• Tensile Strength: 3,127 psi
• Included Components: Resin and Hardener
• Cured Color: Dark Gray
• Total Volume: 2 fl oz
• Hardener Volume: 1 fl oz
• Materials Bonded: Concrete, Fiberglass, Masonry, Metal
• Minimum Performance Temperature: 0 Degrees F
• Non-Sagging: No
• VOC Content Weight Percentage: Less Than 1%
• Low Odor: No
• Standards: OSHA 29 CFR 1910.1200

This Epoxy & Structural Adhesives is chosen for predictable fit and professional handling.

Recommended for facility operations and routine servicing and well-suited for replacement, upgrade, and stock-room use.

Highlights

• Suitable for maintenance, repair, and project-based procurement.
• Helps keep specifications consistent across replacements and replenishment cycles.
• Designed for professional use where predictable fit and handling are important.
• Works well in standardized part lists and preventative maintenance schedules.

Notes: Review application constraints and installation requirements to ensure the part meets your needs.