Semi-Trash Pump, 3In NPT, 6 HP

CONTRACTOR SELECT — Engine Driven Pumps — Semi-Trash Pump, 3In NPT, 6 HP

Designed for professional use, this CONTRACTOR SELECT Engine Driven Pumps helps keep parts and tooling consistent across routine service tasks.

Quick specs

• Body Material: Aluminum
• GPM of Water @ 70 Ft. of Head: 61.1
• Outlet: 3" NPT
• Length: 23-3/4"
• Manufacturer Part Number: 24D039
• UPC: 190735434444

Product information

• UPC: 190735434444
• Country of Origin: Japan
• Manufacturer Part Number: 24D039

Dimensions

• Overall Width: 17 1/8 in
• Overall Length: 23 3/4 in
• Overall Height: 21 3/8 in
• Inlet Dia.: 3 in
• Max. Diameter Solids: 3/4 in
• Solids Diameter - Maximum: 3/4 in
• Discharge Diameter: 3 in
• Inlet Diameter: 3 in
• Length: 23-3/4"
• Height: 21-3/8"
• Width: 17-1/8"
• Engine Size: 179 cc
• Discharge Dia.: 3 in

Details

• Outlet: 3" NPT
• GPM of Water @ 50 Ft. of Head: 145.8
• Check Valve: Buna N
• Material of Construction: Aluminum
• GPM of Water @ 60 Ft. of Head: 90.6
• Mechanical Seal: Silicon Carbide, Buna N
• GPM of Water @ 30 Ft. of Head: 185.9
• Application: Semi-Trash
• Tank Capacity: 3.8 qt
• Agency Compliance: EPA III Approved and CARB Exampt Product
• Engine RPM: 3600
• GPM of Water @ 20 Ft. of Head: 204.5
• Number of Impellers: 1
• Self-Priming: Yes
• Engine Brand: Koshin
• Sensor Type: Low Oil
• Volute/Wear Plate: Spheroid Graphite Ductile Iron
• Inlet: 3 in NPT
• Body Material: Aluminum
• Volute Material: Ductile Iron
• Flow Rate @ 60 Ft. of Head: 90.6 gpm
• RPM: 3,600 RPM
• Maximum Discharge Pressure: 37 psi
• Power Source: Gas Engine
• GPM of Water @ 70 Ft. of Head: 61.1

This Engine Driven Pumps is designed to support reliable operation in demanding environments.

Recommended for inventory replenishment and standardization and chosen for predictable fit and professional handling.

Highlights

• Suitable for maintenance, repair, and project-based procurement.
• Helps keep specifications consistent across replacements and replenishment cycles.
• Designed for professional use where predictable fit and handling are important.
• Works well in standardized part lists and preventative maintenance schedules.

Notes: Verify measurement standards, tolerances, and compatibility with existing assemblies before purchase.