Sewage Pump

ZOELLER — Submersible Sewage Pumps — Sewage Pump

A practical Submersible Sewage Pumps by ZOELLER intended for repeatable results in shop, facility, and field workflows.

Quick specs

• Item: Sewage Ejector Pump
• Flow Rate @ 20 Ft. of Head: 0 gpm
• Duty Cycle: Intermittent
• Overall Height: 14 3/4 in
• Manufacturer Part Number: 264-0005
• UPC: 53514479534

Product information

• Country of Origin: United States
• Manufacturer Part Number: 264-0005
• UPC: 53514479534

Dimensions

• Body Diameter: 13 1/8 in
• Discharge Diameter: 2 in
• Solids Diameter - Maximum: 2 in
• Sump Pit Diameter - Minimum: 18 in
• Max. Diameter Solids: 2 in
• Min. Sump Pit Dia.: 18 in
• Discharge Dia.: 2 in
• Manufacturers Warranty Length: 3 yr
• Cord Length: 15 ft
• Overall Height: 14 3/4 in
• Width at Widest Point: 13 1/8 in

Details

• Flow Rate @ 20 Ft. of Head: 0 gpm
• Duty Cycle: Intermittent
• On Point: 12 1/2 in
• Hz: 60 Hz
• Discharge Standard: NPT
• Rated Voltage: 115V AC
• Shaft Seal Material - Pumps: Carbon, Ceramic
• Max. Liquid Temp.: 130 Degrees F
• Flow Rate @ 15 Ft. of Head: 23 gpm
• Thermal Protection: Yes
• Amps: 9.4 A
• Discharge Gender: Female
• Agency Compliance: C22.2 No. 108, CSA Certified, SSPMA, UL 778, UL Listed
• Switch Electrical Connection: Piggyback
• RPM: 1,725 RPM
• Flow Rate @ 40 Ft. of Head: 0 gpm
• Discharge: 2 in NPT
• Phase: Single
• Rotation Speed - Maximum: 1,725 RPM
• Flow Rate @ 10 ft of Head: 60 gpm
• Series: Model 264
• Requires Control Panel: No Control Panel Required
• Standards: C22.2 No. 108, CSA Certified, SSPMA, UL 778, UL Listed
• Shaft Seal Material: Carbon/Ceramic
• For Media Type: Sewage Water
• Motor Housing Material: Cast Iron
• Feet of Head - Maximum: 18 ft
• Item: Sewage Ejector Pump

This Submersible Sewage Pumps is selected for dependable day-to-day use.

Recommended for field service tasks and on-site replacement and chosen for predictable fit and professional handling.

Highlights

• Suitable for maintenance, repair, and project-based procurement.
• Helps keep specifications consistent across replacements and replenishment cycles.
• Designed for professional use where predictable fit and handling are important.
• Works well in standardized part lists and preventative maintenance schedules.

Notes: Review application constraints and installation requirements to ensure the part meets your needs.