Threadlocker, LOCTITE 266, Red, High Strength, Liquid, 50 mL Bottle

LOCTITE — Threadlockers — Threadlocker, LOCTITE 266, Red, High Strength, Liquid, 50 mL Bottle

Designed for professional use, this LOCTITE Threadlockers helps keep parts and tooling consistent across routine service tasks.

Quick specs

• Color: Red
• Item: High-Strength Threadlocker
• Series: LOCTITE 266
• Size: 50 mL
• Manufacturer Part Number: 232329
• UPC: 079340267732

Product information

• UPC: 079340267732
• Country of Origin: United States
• Manufacturer Part Number: 232329

Dimensions

• For Maximum Thread Diameter: 13/16 in
• For Fastener Dia.: Up to 3/4 in
• Size: 50 mL
• Container Size: 1.69 fl oz

Details

• Standards: California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA
• Threadlocker Disassembly: Permanent
• Specific Gravity: 1.19
• Flash Point: 200 Degrees F
• Viscosity: 2500.0 mPa·s - 5000.0 mPa·s
• VOC Content: 11.08 g/L
• Clean Up Method: Solvent, Wire Brush
• Mixing Required: No
• Storage Requirements: 8 Degrees to 21 Degrees C
• Full Cure Time: 1 day
• Chemical Base: Dimethacrylate
• Prevailing Torque: 75 in-lb
• Removal Method: Hand Tool and Heat
• Maximum Viscosity: 11,000 cps
• VOC Content Weight Percentage: 0.01 %
• Minimum Viscosity: 7,000 cps
• Recommended Surface Preparation: Dry Surface
• Maximum Operating Temperature: 450 Degrees F
• Minimum Operating Temperature: -65 Degrees F
• Threadlocker Properties: High-Temperature Resistant
• Breakaway Torque: 265 in-lb
• Compatible Primer Series: Loctite 7649
• Characteristics: Mix No Mix Required,Strength High Strength,Thixotropic,Viscosity High Viscosity
• Item: High-Strength Threadlocker
• Series: LOCTITE 266
• Color: Red
• Product Form: Liquid
• Container Type: Bottle
• Threadlocking Strength: High
• Cure Type: Anaerobic
• For Material Type: Brass, Bronze, Copper, Iron, Manganese, Monel, Nickel, Steel
• Working Time: 15 min
• Gap Fill: 0.005 in
• Threadlocker Classification: Threadlocker
• Application: Locks Fasteners Up to 3/4 in dia
• Temp. Range: -65 Degrees to 450 Degrees F
• Chemical Type: Anaerobic

This Threadlockers is chosen for predictable fit and professional handling.

Recommended for field service tasks and on-site replacement and designed to support reliable operation in demanding environments.

Highlights

• Helps keep specifications consistent across replacements and replenishment cycles.
• Designed for professional use where predictable fit and handling are important.
• Works well in standardized part lists and preventative maintenance schedules.
• Clear specification formatting helps reduce ordering mistakes.

Notes: Confirm fit, compatibility, and any site-specific requirements prior to ordering or installation.