Waste-Mate 1/2 HP 2" Manual Submersible Sewage Pump 460V

ZOELLER — Submersible Sewage Pumps — Waste-Mate 1/2 HP 2" Manual Submersible Sewage Pump 460V

A practical Submersible Sewage Pumps by ZOELLER intended for repeatable results in shop, facility, and field workflows.

Quick specs

• Amps: 1.50 A
• Max. Liquid Temp.: 130 Degrees F
• Voltage: 460
• Height: 14-9/32"
• Manufacturer Part Number: 267-0041
• UPC: 053514093495

Product information

• Country of Origin: United States
• Manufacturer Part Number: 267-0041
• UPC: 053514093495

Dimensions

• Solids Diameter - Maximum: 2 in
• Max. Diameter Solids: 2 in
• Cord Length: 15 ft
• Cord Length - Pumps: 20 ft.
• Manufacturers Warranty Length: 3 yr
• Max. Dia. Solids: 2"
• Diameter: 13-1/16"
• Height: 14-9/32"
• Min. Sump Pit Dia.: 18 in
• Discharge Dia.: 2 in
• Body Dia.: 13 1/16 in
• Overall Height: 14 1/4 in
• Sump Pit Diameter - Minimum: 18 in
• Width at Widest Point: 13 1/8 in
• Discharge Diameter: 2 in
• Body Diameter: 13 1/8 in

Details

• GPM of Water @ 15 Ft. of Head: 50
• Impeller Material - Pumps: Cast Iron
• Shaft Seal Material - Pumps: Carbon, Ceramic
• Max. Head - Pumps: 21 ft.
• Thermal Protection: No
• Amps - Pumps: 1.50
• GPM of Water @ 10 Ft. of Head: 89
• Discharge NPT: 2"
• Housing Material: Cast iron
• Flow Rate @ 20 Ft. of Head: 10 gpm
• Rated Voltage: 460V AC
• Switch Electrical Connection: No Switch Included
• Discharge: 2 in FNPT
• Discharge Gender: Female
• Flow Rate @ 15 Ft. of Head: 45 gpm
• Amps: 1.50 A
• Max. Liquid Temp.: 130 Degrees F
• Voltage: 460

This Submersible Sewage Pumps is selected for dependable day-to-day use.

Recommended for field service tasks and on-site replacement and well-suited for replacement, upgrade, and stock-room use.

Highlights

• Works well in standardized part lists and preventative maintenance schedules.
• Clear specification formatting helps reduce ordering mistakes.
• Organized for straightforward purchasing and stocking.
• Suitable for maintenance, repair, and project-based procurement.

Notes: Verify measurement standards, tolerances, and compatibility with existing assemblies before purchase.